The Tamil Nadu government has allotted 300 acres of land for the National Automotive Testing Research and Development Infrastructure Project at Oragdam, near here.  

The facility will be set up by the Centre with an investment of around Rs 450 crore. The government also said it is formulating a new automobile policy to boost investment in the automobile sector.

Speaking to reporters after inaugurating the facility of Renault Nissan Automobile India, being set up by French car major Renault and Japanese car manufacturer Nissan at a cost of Rs 4,500 crore, chief minister M Karunanidhi said the project aimed at facilitating introduction of world-class automotive safety, emission and performance standards and also ensuring seamless integration of the automotive industry with the global industry.

The government would also continue to attract more projects in the state to make Chennai one of the top ten centres for automobile manufacturing in the world, he added. The city currently is home to seven auto majors including Daimler, Ford, BMW, Hyundai and Mitsubishi.

Karunanidhi said his government had signed 25 MoUs and issued orders for another 12 industries since May 2006. “The total investments in these 37 industries will be about Rs 46,091 crore and create employment potential for 222,000 people directly and indirectly,” he said.

However, despite emerging as the largest automobile hub in the country, Chennai lacked in vehicle testing facilities forcing auto manufacturers to send their vehicles to Pune for testing and certification, he added

COSTA MESA, CA--(Marketwire - February 3, 2010) - SaVi Media Group (PINKSHEETS: SVMI) announces recent vehicle testing results for Fleet Markets, a core marketing/sales strategy for 2010. The seven vehicle types were tested both prior to DynoValve installation and after installation, showing significant improvement in both engine performance and emissions reduction. In addition, vehicles also demonstrated increased fuel mileage.

The Chevy 30 Step Van, a mainstay of the Corporate/ Business Fleet market resulted in consistent 60% increases in fuel mileage through multiple tests. Impala and Crown Victoria, stalwarts for Municipal/State Fleet market, showed 20-25% improvement in fuel mileage testing.

The Specialty Fleet Market testing concentrated on car clubs and limousines. Hummer Limo, Hummer, Ford pick-ups, Motor home and other vehicles were tested and had increased fuel mileage depending on the vehicle.

Multiple tests were conducted and measured on each vehicle for 100 miles of highway driving on each test. To view the test results -- http://www.saviautomotive.com/test-results.doc

"We are very pleased with our recent DynoValve testing results. The results will greatly assist and support the efforts by our sales and marketing teams as we move forward concentrating on Corporate, Business, Municipal and Specialty Fleet markets throughout the country in 2010," stated Serge Monros, Chief Executive Officer of SaVi Media Group, Inc.

In other news, Savi Media Group will be announcing the launch of a new corporate website near the end of March supporting our distributors for our products and shareholders alike.

Safe Harbor Statement:

This release contains forward-looking statements, which are made pursuant to the safe harbor provisions of the Private Securities Litigation Reform Act of 1995. We use words such as "anticipate," "believe," "expect," "future," "intend," "plan," and similar expressions to identify forward-looking statements. Forward-looking statements include, without limitation, our ability to increase income streams, to grow revenue and earnings, and to obtain other Joint Ventures. These statements are only predictions and are subject to certain risks, uncertainties and assumptions, which are identified and described in the Company's public filings with the Securities and Exchange Commission.

Econ Technologies successfully attended Automotive Testing Expo 2010 India, which is Hall 2, HITEX Exhibition Centre, Hyderabad, India. Automotive Testing Expo is the most targeted gathering of automotive test and evaluation executives in the world and it is its first time to be set up in India due to India fast growing automotive industry and related test.

Since 2007, Econ products had been successfully promoted and employed in India market and now earning more and more customers located in automotive, aviation &aerospace, shaker manufacturer, universities and institutes. Automotive Testing Expo 2010 India is fruitful for us, since so many sales leads are found and we are so happy to get to know experienced professionals and passionate local people.

For future, we have full confidence about India economy growing and we are looking forward to work with all potential local partners.

ECON Will Attend for  in Singapore

CIA as the leading event in Asia for process engineering technology & process control, automation, instrumentation, analytical & laboratory technology and services, CIA2009 is in place to present yet another eventful staging. Showcasing the latest scientific instrumentation and process engineering technologies which can enhance product quality, improve process safety and plant availability, gain competitive advantage, increase production uptime and compliance, efficiently utilize resources and expand manufacturing capacity. CIA2009 is certainly where industry leaders make their mark.

ControlsAsia2009 & InstrumentAsia2009
Ongoing infrastructure developments within the energy, downstream (petroleum) and chemical sectors remain as the key drivers for process controls and instrumentation in the near term… Click here for more.

AnaLabAsia2009
The global market for analytical instrumentation increased from $26 billion in 2002 to more than $36 billion in 2007. The last few years have been particularly eventful with industry participants reporting record sales driven by robust growth in China and other Asia Pacific areas … Click here for more.

Econ Technologies cordially invites you to join the fair to expand our business. You can enter by free with simple registration with your business card on the spot.

Booth Information: 4M3-10.

Exhibition Dates: 1~4 December 2009

Venue: Suntec Singapore, Level 4

Opening Hours: 10.30am~6.00pm

June 16, in Jiulong Hotel Science City, Mianyang, Econ Technologies successfully held the technical conference themed with "new technology developments of vibration control and testing --- multi-point multi-axis vibration control technology". Engineers and experts in the fields of vibration testing, vibration and noise measurement, modal analysis, shock measurement, data acquisition and signal analysis attended the meeting and the meeting came to a successful conclusion.

Followings are pictures on site:

Econ Technologies combined with Shannxi metrology institute successfully organized Xi'an Seminar, received well approval and praise from experts and elites, that encouraged us to extend such a meeting and let us get full confidence in following conferences.

Sharing with you the pictures on site:


ECON Products Display


Conference Site


Introduction of ECON


Applications of ECON Products

To promote the establishment of mutual cooperation for lab-to-field, as well as the technology revolution of test and measurement industry, to accelerate the applications of advanced test measurement and vibration test technology, meanwhile to comply with the latest GJB. Hangzhou Econ Technologies combines with Shannxi metrology institute, hereby organizes this seminar to provide a good communication and cooperation opportunity for the measurement institute, aerospace, national defense, education and scientific research and other industries, also through this extensive contact among experts and elites, to provide you with more professional technical guidance and product applications.

Prior to the seminar in Xi'an, Econ Technologies has been successfully held such a meeting in Xiamen, Hangzhou, Zhenjiang, well approval and praise has been received from experts and elites. In the following days, we will be in Chengdu, Guangzhou and other places to continue this seminar, welcome related experts and elites to visit on site.

Schedule:

Participants: research institutes and tertiary institutions specializing in the measurement of the vibration and noise, modal analysis, shock measurement and vibration testing, military units in the field of data acquisition and signal analysis.

Organizers: Hangzhou Econ Technologies Co., Ltd.

Co-organizers: Shaanxi Metrology Institute

Date: May 22, 2009

Location: Xi'an Gaoxin Zone Daisi Hotel 21F (Gaoxin Road Xi'an Gaoxin Zone)

CISILE is an annual event which covers Analytical, Optical, Biotechnical and Testing instrumentation for the laboratory industry. 

Supported by China Instrument Manufactures Association, CISILE (China International Scientific Instrument and Laboratory Equipment Exhibition) is now the largest scientific instrumentation exhibition in China.

CISILE2009 is held at Beijing Exhibition Center from 9-11 April. Over 500 exhibitors are expected to take up 22,000 square meters of exhibition space providing the 20,000 visitors access to the latest technology and products available from around the globe. 

China is a key region of Asia and in its continuing policy to pursue a free market has now become a leading importer of modern analytical instrumentation and laboratory equipment.

Last year CISILE 08 had 412 exhibitors including global manufacturers like Agilent, Shimadzu, KNF Neuberger, Sympatec, Heraeus, Horiba, Mettler Toledo, Pysik, Pall Filter, Rion and Adam Equipment etc from 19 countries including USA, Japan, Korea, Germany, UK, Finland and Austria and attracted 18,756 visitors from 33 countries. 

Econ Technologies located in No.2 exhibition hall, 2286 booth. We successfully displayed Dynamic Signal Analyzer, AVANT Integer DAQ and Signal Analyzer, Signal Conditioning Amplifier, Vibration Controller and Large Scale Signal Analysis System. ECON has well received customers from domestic, Japan, South Korea, Middle East and so on. Once again enhance ECON's fame popularity.
 

ECON today move into new office building, which located in north of hangzhou. Now total 6 floors are our offices, at first floor is our new testing department. New facilitites, new environment, we will take on a new aspect!

               
                       Tel: +86-571 88178376
                       Fax:+86-571 88178385
                       Add: Building 4
                       Shangcheng District Industrial Park,
                       1418 Moganshan Rd.,Hangzhou 310011
                       China
...

Econ Technologies today is pleased to announce the launch of their latest integrated Data Acquisition System and Spectrum Analysis System, the AVANT Integer.

AVANT Integer provides the embedded computer integrated with signal analysis & test system program for engineers, it can immediately start substantive testing work without having to cope with complicated connection headache. In the same time of supplying convenient testing, AVANT Integer possesses real-time signal analysis, data acquisition and analysis, data recording, playback and other analysis functions, which can be enough to satisfy a variety of test application requirements. AVANT Integer not only provides high-quality test performance for engineers, but also simplifies the real test of their work.

This builds on the portability of the embedded Intel ULV Celeron M processor and 10.4" LCD touch screen to break new ground. The integrated 32bit floating point DSP provides enough processing power for the most demanding analysis.

As you might expect from Econ Technologies, AVANT Integer’s robust housing underwent tough shock and vibration testing to ensure the real-time DAQ instrument could readily handle field use. The AVANT Integer is equipped with MATLAB and Labview connectors. AVANT Integer sets new performance and usability benchmarks in the portable high end DAQ marketplace.

Econ Technologies is going to take part in ARABLAB 2009 held at Dubai International Convention and Exhibition Centre Halls 5, 6, 7 & 8., on Saturday 10th January 2009 to Tuesday 13th January 2009 [From: 10.00 hrs - 18.00hrs DAILY].

ARABLAB is the No1 Business to Business show for the Analytical Industry. The only trade show for the Analytical Industry that reaches buyers from the growth markets... Middle East & Africa... the Indian Sub-Continent... China & Asia. 

Under the patronage of DuBiotech, ARABLAB provides a unique selling platform for industry leaders involved in analysis, laboratory technology, biotechnology, life sciences, and high-tech laboratory automation.

Econ Technologies is a Chinese leading designer and manufacturer of vibration test products, measurement instruments and industrial instrumentation. We have a pioneering and innovational R&D team and a manufacturing facility located in Hangzhou, China. Econ Technologies is also a comprehensive solution provider in environmental reliability test, measurement and analysis, and industrial control. Our customers are among automotive, vessel, electronics, computers, and aerospace/aviation as well as institutes and universities. Now, we have over 1,000 instruments well installed and employed worldwide.

Econ Technologies cordially invites you to join the fair to expand our business.

Booth Information : Hall 5, 200921.

Econ Technologies today released a new software version 4.0 of Vibration Controller. The latest vibration controller software is more convenient for users, providing a broader range of vibration control. This version software displays a bran-new user interface, which makes users feel simpler to do the operation. The new software also adds support for the TEDS, modifies the previous BUG, at the same time increases the E-mail notifications on the results of the report....

Avant.Plus creates a powerful and precise large-scale signal analysis engine, flexible combined with different purposes of embedded cards, with support of signal input, wave source output, and tacho connection. It is designed based on PXI structure to assure real multi-channels synchronized data acquisition, analysis and transmission. Multiple Avant.Plus chassis can be connected together via Ethernet, just like a number of single channel analyzers in your hand and without any degrading of performance while synchronized....

Automotive Testing Expo 2008 China, the world’s leading trade fair for automotive vehicle and component test, evaluation and quality engineering, returns to Shanghai, with more exhibitors and more technology on show. Shanghai is near to our headquarter Hangzhou, seizing the opportunity, We are ready to show the best of us. Most importantly, business is conducted face-to-face – the most effective way to build and sustain customer relations. ...

In many uses from field to lab, engineers don’t need complex analysis, and they only care a quick data acquisition and simple frequency domain detection. Avnat.Lite is just a portable solution for this kind of simple use. It features a special excellent economical system for easy data acquisition and limited purpose analysis, saves you time and helps you to get results quickly in data recording, post-processing, and analysis. Especially, Avnat.Lite supplies interface for more post back data analysis in LabView and MATLAB....

ECON is pleased to announce that it will be exhibiting at Automotive Testing expo 2008 Europe exhibition in Messe Stuttgart on May 6th, 7th and 8th in 2008. Our booth number is 1268, on the occasion, we will build more elaborate displays, showcasing a more expansive cross-section of our product ranges. ...

ECON supplies a powerful series of instruments specializing in shock measuring and analysis. It is a tailored solution for shock pulses transient capture and analysis according to rigorous criterions of ISO and MIL-STD-810. Moreover, you can get physical attributes of tested articles by effective SRS analysis....

ECON is pleased to announce that it will be exhibiting at Automotive Testing expo 2007 China exhibition in Shanghai on Sep. 12th, 13th and 14th in 2007. Preparations are being made to display an UCON-8 Vibration Controller, an AVANT-10 Dynamic Signal Analyzer and a ST-05H Measuring Instrument for Shock. Exhibit staff will include personnel from corporate headquarters in Hangzhou....

ECON is pleased to announce that it will be exhibiting at Automotive Testing expo 2007 China exhibition in Shanghai on Sep. 12th, 13th and 14th in 2007. Preparations are being made to display an UCON-8 Vibration Controller, an AVANT-10 Dynamic Signal Analyzer and a ST-05H Measuring Instrument for Shock. Exhibit staff will include personnel from corporate headquarters in Hangzhou....

ECON is pleased to announce that it will be exhibiting at the 9th National Vibration Theory and Application (NVTA) Conference of China in Hangzhou on October in 2007. Preparations are being made to display a UCON-8 Vibration Controller, an AVANT-10 Dynamic Signal Analyzer and a ST Shock Measurement Tester, also a engineering presentation will be addressed in NVTA conference. Conference staff will include personnel from corporate headquarters in Hangzhou. ...

Latest AVANT DSA Software is easier to use than Ever and has stronger Capabilities. New User Main Interface Features AVANT DSA Software Version2.095 issues a new user main interface with all testing functions displayed. It can help users launch their application easily and quickly. Moreover, this feature gives more reliability and stability to the software. Stronger Calculate Capabilities AVANT DSA Software Version2.095 defines a new Signal Calculator which can perform more comlicated signal calculation such as 1st and 2nd differential coefficient, 1st and 2nd integral algorithms. These features |make your test and analysis more convenient in engineering....

ECON is pleased to announce that it will be exhibiting at the 5th China International Scientific Instrument and Laboratory Equipment Exhibition (CISILE) in Beijing on May 23rd, 24th and 25th in 2007. Preparations are being made to display a UCON-8 Vibration Controller, an AVANT-10 Dynamic Signal Analyzer and a ST Shock Measurement Tester. The ECON exhibit will be located at stand 6289 in the 11th exhibition hall at Beijing Exhibition House. Exhibit staff will include personnel from corporate headquarters in Hangzhou. ...

High-Sampling and High-Acceleration This Module can meet more rigorous shock measurement requirements, especially the high sampling and high acceleration level requirements like military and explosive measurements.Sampling frequency: up to 1MHz. Acceleration range: up to 100,000gn Meet wide range of criterions The ST series can meet the TP-3, JJG, ISO, DELL and MIL-STD-810E criterions, or user defined standards. This feature not only enlarges the suitability of the instrument but also assures the measurement results more trustable in application. Shock Response Spectrum (SRS) Analysis It can calculate the SRS automatically or manually and this feature adds more value into your investment in testing. Test Recall ST can store customized measurement data in test and recall them just lick seeing a series of snapshots of original data. This feature helps engineers to do a further detail detection and analysis. ...

ECON is pleased to announce that the ECON Equipment Manual (Universal version) and the user guides and operations manuals for many of the options included on ECON Test Chambers are now available as downloads from this website. We have created a page titled "Data Sheet" where all of the available documents are listed. Links are provided where a user can download a PDF document. Included in the list are the UCON, AVANT, ST and other solutions manuals. To immediately access this page, click here....